Mark out and pre-drill 6mm holes at approx 300mm centres along the
canopy flanges (some canopies may have a tray and lid assembly).
Offer canopy up to the wall and centralise it above the door
opening. Mark off the position on the wall for the bracket
assembly (if brackets are to be fitted). Make sure you markings
are straight and level.
Offer the bracket up to the wall at each
side of the door opening. Drill and plug the wall using a 7mm
masonry drill bit. Screw the bracket to the wall using 3" screws
and plugs supplied.
Lift the canopy onto the brackets and centralise over the door
opening. Drill and plug the wall as before, this time using
2"screws and plugs supplied.
Cover all visible screw heads with the appropriate coloured
Clean canopy using soap and water or a non-abrasive cleaner.
Seal canopy to the wall using and appropriate colour sealer.
(Sealer is not supplied).
Your over door canopy is maintenance-free, however we recommend
regular cleaning with soap and water to maintain it's good looks
for many years to come.