Interior cladding

The 1-2-3 system

Other information

The product in more detail
There is a wide range of finishing profiles in white to enable internal and external corners, coving, joining and edge finishing. Printed edge profiles are also available in the colours italian marble and grey.

Decorative channel infils and infils are available in black, gold and silver to create a superb finishing touch.

Fire rating
Complies to BS 476, part 7, class y, surface spread of flame.

Thermal properties
This product is a lightweight material and has a low thermal conductivity and specific heat. In conditions of intermittent heating this product will warm up quickly, providing early comfort conditions for the occupants, and will help to reduce the risk of surface condensation.

Limitations
Abrasive cleaning agents must not be used, PVC will react to certain solvent adhesives. Masking or other adhesive tapes, applied to the printed surface is not recommended, since the printed pattern may be removed. This product may suffer from some distortion if place in front of, or adjacent to a cooker or fire etc. and despite its very highly protected surface prolonged exposure to ultra violet will cause colours to fade.

For walls and ceilings
The simplicity of installation provides the advantage of not having to use highly skilled labour, and providing the background is flat the cladding can be adhered directly to the wall, removing the necessity to render.

The cladding can be mounted horizontally, vertically on the whole surface of the wall, or just partly as wainscotting. Decorative cladding can give a cost saving of up to 50% on conventional tiling.