|
Fully Weather Tested to 2.5 Pitch By the BBA - British Board of
Agrement (Test Report No. 1885)
‘Skyport’ Roofvents
are individually custom made to fit into the glazing bars on your
roof, maintaining the original structural integrity.
Glazing connector profiles on the top and bottom of the frame accept
the roof glazing material or alternatively the top can be pushed into
the wallplate or ridge aperture.
The frame is factory prepared, mechanically fixed and sealed ready for
site installation. The Roofvent lid is simply glazed on site with
gasket provided.
Detachable access lid at 45
degrees (winder disconnects)
|
|
Structural aluminum
Roofvent with internal thermal PVCu cladding
Powder coated
aluminium external finish for longevity
Roofvent accommodates 16mm and 25mm Polycarbonate and 24mm Glass
Units. 'Skyport Plus' Roofvents available for 35mm and 40mm
Polycarbonate.
Suitable for low
pitch roof applications
Available in white, brown or a combination & Mahogany Woodgrain. Other
colours to order
Traditional ogee
styling on internal and external elevation
Manufactured to glazing rebate size to glaze into bars
Easy to fix and install on site (installation guide supplied)
Slimline Roofvent profiles for excellent sightline aesthetics
Electric openers and accessories available
Detachable lid for access and ease of installation
Integral water drainage system
Fast
availability within 5 working days
Very competitively priced for a high quality roofvent
|
Chain
motor Variable opening 100mm-250mm. 230v and supplied with surface
mounted rocker switch or with climate control unit. 
Offers
precise thermostatic control with integral rain sensor which
automatically closes the Roofvent when rain is detected. Climate
control units are used in conjunction with electrical operated vent
openers.
For
operating manual spindle openers on Roofvents. Standard-Gold Anodised
Aluminium I.5m long and Delux - Solid Brass with hardwood handle 1.5m
long. Note: Other lengths of winding handle can be supplied.