Our new range of glazing bars have been designed to provide a range
of spanning distances for a multitude of applications from domestic
lean-to conservatories to large commercial glazing areas. Polytec bars
are designed to make installation as quick and easy as possible and
are complemented by a simple and effective variable pitch wall plate
and eaves beam system.
All Polytec self supporting bars, wall plates and eaves beams are
supplied in a range of lengths and come complete with all structural
aluminium profiles, PVC top cappings and undercladding, gaskets, end
caps and fixing screws. All products are conveniently packed in
individual poly-tubes for today’s fast moving trade sales outlets.
The Polytec Self Supporting Glazing Bar Range is available as a Main
Bar and Universal Edge Bar, in 2.5, 3.0, 3.5, 4.0 and 6.0 metre
lengths in White PVCu or Mahogany Woodgrain. Each product is packed
complete with structural aluminium bar, relevant glazing plastics,
gaskets, end cap, fixing screws and colour coded caps together in
individual poly-tubes. Wall plates and eaves beams are available in
white and mahogany/brown in 3.0, 4.0 and 6.0 metre lengths. For
prices, please refer to the Polytec Glazing Bars and Accessories Price
List.
If any changes are made to our specification, we will notify you via
our website.
|
|
 Polytec
‘Universal Edge’ Bar is used at the verge
ends of lean-to roofs to finish the edges. This bar is used with both
‘Polytec 70’ and ‘Polytec 85’ bars and suitable for 16mm to 25mm thick
glazing. The one piece top capping incorporates a side trim to cloak
vertical glazing detail.
Provides a strong and simple solution to fix bars at the eaves on top
of the windows or up-stands. A flipper gasket seals between the
glazing bars. The eaves beam can be fixed from either above or below
and is variable pitch from 2.5º to 30º
Polytec Variable Pitch ‘Wallplate’ is very simple to install between
2.5º to 30º pitch. When screw fixed to the wall, bars bolt onto the
wall plate and glazing is pushed up into the glazing aperture and
sealed effectively. The wallplate can be conveniently flashed prior to
fitting the roof.
‘Polytec 70’ Standard Bar is the smallest and most economical self
supporting bar typically used for smaller domestic lean-to
applications or over purlins on larger roofs. It has a maximum span of
3.15 metres at 600mm centres and is suitable for 16mm to 25mm
polycarbonate sheet.
‘Polytec 85’ Heavy Duty Bar is for larger lean-to roofs or commercial
glazing applications where longer spans or heavier loading
specifications are required. It has a maximum self supporting span of
up to 4.15 metres at 600mm centres and is suitable for 16mm to 25mm
polycarbonate sheet or glass units (contact our sales office for
spanning details on glass units).
‘Polytec 110’ Super Heavy Duty Bar is used for large roof and low
pitch roof glazing applications and is capable of spanning up to 5.4
metres at 600mm centres. The Polytec 110 bar is used exclusively in
the System 40 Roof System with 40mm polycarbonate panels. This glazing
bar uses a larger wall plate than the standard wall plate.
|
|
