10mm Sheet Closure for Polycarbonate Sheets - Brown
- Brand: Master Plastics
- Product Code: SDBSC10B
- Availability: In Stock
10mm Polycarbonate Sheet Closure - 2.1m White or Brown
This 10mm Polycarbonate Sheet Closure is designed for fitting to the bottom edge of 10mm twinwall polycarbonate roofing sheets. It fits over the anti-dust tape, helping protect the taped edge of the sheet while providing a neat finished appearance.
The closure also acts as a drip edge, helping direct rainwater from the bottom of the polycarbonate sheet into the guttering.
Key Features
- Product: Polycarbonate Sheet Closure
- Sheet Thickness: 10mm
- Length: 2.1m (2100mm)
- Suitable For: 10mm Twinwall Polycarbonate Sheets
- Position: Bottom edge of the sheet
- Colour Options: White or Brown
- Used With: Vented anti-dust tape
- Function: Protects the taped edge and creates a drip into the gutter
10mm Twinwall Polycarbonate Sheet Closure
Multiwall polycarbonate sheets have open flutes at the cut ends. At the lower edge of the roof, the appropriate vented anti-dust tape is fitted across these open channels.
The sheet closure is then fitted over the taped edge, helping protect the tape from weather and accidental damage.
Drip Edge for Polycarbonate Roofing
The profile creates a drip detail at the bottom of the roofing sheet. This helps rainwater leave the end of the polycarbonate cleanly and drain into the guttering below.
This makes the sheet closure an important finishing component when installing a polycarbonate roof with guttering.
2.1 Metre Length
Each closure is supplied in a 2.1 metre (2100mm) length and can be cut to the required width of the polycarbonate sheet during installation.
Available in White or Brown
Choose between White or Brown to coordinate the sheet closure with your polycarbonate roofing bars, guttering and other roof components.
Suitable Applications
- Conservatory roofs
- Lean-to roofs
- Canopies
- Carports
- Covered walkways
- Garden structures
- Replacement polycarbonate roofs
- DIY polycarbonate roofing projects
How to Fit a Polycarbonate Sheet Closure
Apply the appropriate vented anti-dust tape to the bottom edge of the 10mm polycarbonate sheet. The sheet closure is then fitted over the taped edge.
Install the closure with the drip detail correctly positioned so that rainwater is directed towards the guttering.
Product Specification
- Product Type: Polycarbonate Sheet Closure
- Sheet Compatibility: 10mm Twinwall Polycarbonate
- Length: 2100mm
- Colour: White or Brown
- Installation Position: Bottom edge of roofing sheet
- Used Over: Vented anti-dust tape
- Purpose: Tape protection and water drip detail
Please check that the 10mm closure matches the thickness of your polycarbonate sheets before ordering.
Related Products
