10mm Polycarbonate Sheet Closure - 2.1m White or Brown

This 10mm Polycarbonate Sheet Closure is designed for fitting to the bottom edge of 10mm twinwall polycarbonate roofing sheets. The closure fits over the anti-dust tape, helping protect the taped edge while creating a neat and practical finish to the bottom of the sheet.

The profile also acts as a drip edge, helping rainwater leave the end of the polycarbonate sheet and flow into the guttering below.

Key Features

• Product: Polycarbonate Sheet Closure
• Sheet Thickness: 10mm
• Length: 2.1m (2100mm)
• Suitable for: 10mm Twinwall Polycarbonate
• Position: Bottom edge of the sheet
• Colour Options: White or Brown
• Used With: Anti-dust tape
• Function: Sheet edge protection and water drip detail

10mm Twinwall Polycarbonate Sheet Closure

The 10mm sheet closure is specifically designed to fit the lower edge of compatible 10mm twinwall polycarbonate sheets.

After the appropriate anti-dust tape has been fitted to the open sheet end, the closure is fitted over the taped edge to provide additional protection and a cleaner finished appearance.

Protects the Anti-Dust Tape

Anti-dust tape helps protect the open flutes of multiwall polycarbonate at the lower end of the sheet. The sheet closure fits over the tape, helping shield it from weather and accidental damage.

Creates a Drip Edge into the Guttering

The profile also provides an important drip detail at the bottom of the polycarbonate roof sheet. This helps water leave the sheet cleanly and drain into the guttering rather than running back underneath the sheet edge.

2.1m Polycarbonate Closure

Each closure is supplied in a 2.1 metre (2100mm) length and can be cut to the required size during installation where necessary.

White or Brown

Select either White or Brown when ordering to coordinate the sheet closure with your polycarbonate roofing system.

Suitable Applications

This 10mm polycarbonate sheet closure is suitable for compatible 10mm twinwall roofing projects including:

• Lean-to roofs
• Canopies
• Carports
• Covered walkways
• Garden structures
• Replacement polycarbonate roofs
• DIY polycarbonate roofing projects

How to Fit the Sheet Closure

Apply the appropriate anti-dust tape to the bottom open edge of the 10mm polycarbonate sheet. The sheet closure is then fitted over the taped edge.

Position the closure so that the drip detail faces towards the guttering, allowing rainwater to drain from the roof sheet into the gutter below.

Product Specification

• Product Type: Polycarbonate Sheet Closure
• Sheet Compatibility: 10mm Twinwall Polycarbonate
• Length: 2100mm
• Colour: White or Brown
• Installation Position: Bottom edge of sheet
• Used Over: Anti-dust tape
• Purpose: Protects tape and creates a drip edge

Please select White or Brown when ordering and check that the closure matches your 10mm polycarbonate sheet thickness.