17mm White uPVC Fascia Board 410mm x 1m

The 17mm x 410mm x 1m White Full Replacement Fascia Board provides a durable and practical solution for replacing or upgrading existing roofline fascia. Manufactured from high-quality uPVC, it offers a clean white finish with resistance to weathering, rot and fading.

The substantial 17mm thickness means no backing timber is required, reducing the amount of wood needed during installation. The board is also thick enough to hold the screws used for gutter brackets. Boards should be fitted using 65mm nails.

17mm Full Replacement Fascia – No Backing Timber

Designed as a full replacement board, this fascia can be fitted directly onto the roof structure without additional backing timber. This simplifies installation and reduces the amount of timber required for the roofline.

Double-Edged 410mm Fascia Board

The 410mm wide double-edged profile provides flexibility during installation, with a finished edge on both sides. If a straight-cut edge is required, the board can be trimmed to a maximum width of 395mm.

White uPVC Fascia

The bright white finish provides a clean appearance suitable for a wide range of properties. The durable uPVC construction offers a low-maintenance solution for fascia replacement and roofline upgrades.

Product Specifications

• Product Type: Full replacement uPVC fascia board
• Colour: White
• Thickness: 17mm
• Width: 410mm
• Length: 1m
• Width Tolerance: ±5mm
• Profile: Double-edged
• Maximum trimmed width: 395mm
• Backing Timber: Not required
• Installation: Directly onto the roof structure
• Recommended Fixing: 65mm nails
• Gutter Brackets: Board is thick enough to hold gutter bracket screws

Durable, Low-Maintenance Roofline

Manufactured from high-quality uPVC, this fascia board provides a durable and low-maintenance solution for residential and commercial roofline projects. The 1m length is suitable where shorter lengths are required for fascia replacement or repair work.

Dimensions

17mm x 410mm x 1m. Width tolerance: ±5mm. The double-edged board can be trimmed to a maximum width of 395mm where a straight-cut edge is required.