25mm Polycarbonate Sheet End Closure - 2.1m White

This 25mm White Polycarbonate Sheet End Closure is designed for fitting to the bottom edge of 25mm multiwall polycarbonate roofing sheets. It fits over the appropriate anti-dust tape, helping protect the taped edge while providing a neat and professional finish.

The closure also acts as a drip edge, helping direct rainwater from the bottom of the polycarbonate sheet into the guttering below.

Key Features

• Product: Polycarbonate Sheet End Closure
• Sheet Thickness: 25mm
• Length: 2.1m (2100mm)
• Colour: White
• Position: Bottom edge of polycarbonate sheet
• Used With: Appropriate anti-dust tape
• Function: Protects the taped sheet edge and creates a drip into the gutter

25mm Polycarbonate Sheet Closure

This profile is designed to fit the end of compatible 25mm multiwall polycarbonate sheets. Once the appropriate anti-dust tape has been applied to the open sheet channels, the closure fits over the taped edge.

This provides additional protection for the end of the sheet while creating a clean finished appearance.

Protects the Anti-Dust Tape

Multiwall polycarbonate sheets contain open internal channels at the cut ends. The lower edge is protected using the appropriate anti-dust tape before the sheet closure is installed.

Fitting the 25mm end closure over the tape helps protect it against weather and accidental damage.

Drip Edge into the Guttering

The profile creates a drip detail along the bottom edge of the polycarbonate sheet. This helps rainwater leave the sheet cleanly and drain into the guttering rather than tracking back underneath the roofing sheet.

2.1m White Sheet End Closure

Each closure is supplied in a 2.1 metre (2100mm) length with a clean White finish.

The profile can be cut to the required sheet width during installation where necessary.

Suitable Applications

• Conservatory roofs
• Lean-to roofs
• Carports
• Canopies
• Covered walkways
• Garden structures
• Replacement polycarbonate roofs
• DIY polycarbonate roofing projects

How to Fit the Sheet Closure

Apply the appropriate anti-dust tape across the bottom open edge of the 25mm polycarbonate sheet. The sheet closure is then fitted over the taped edge.

Position the closure with the drip detail facing towards the guttering to help direct rainwater away from the sheet.

Product Specification

• Product Type: Polycarbonate Sheet End Closure
• Sheet Compatibility: 25mm Multiwall Polycarbonate
• Length: 2100mm
• Size: 25mm
• Colour: White
• Installation Position: Bottom edge of sheet
• Used Over: Anti-dust tape
• Purpose: Tape protection and water drip detail

Please check that your polycarbonate roofing sheet is 25mm thick before ordering this sheet closure.