10mm Bronze Twin Wall Polycarbonate Sheet – 4500mm x 700mm

Our 10mm Bronze Twin Wall Polycarbonate Sheet is a strong, lightweight roofing sheet ideal for canopies, carports, pergolas, patio covers, bike shelters, sheds, lean-to roofs and many other outdoor roofing projects.

This sheet measures 4500mm long x 700mm wide x 10mm thick. The bronze tint allows natural daylight through while helping to reduce glare and the intensity of direct sunlight compared with clear polycarbonate.

Bronze polycarbonate is particularly useful for sunny and south-facing roofs where good natural light is wanted but some additional solar shading is beneficial.

Product Specifications

• Product: Twin Wall Polycarbonate Roofing Sheet
• Thickness: 10mm
• Length: 4500mm
• Width: 700mm
• Colour: Bronze
• Structure: Twin Wall
• Material: Polycarbonate
• Application: Roofing & Glazing

Bronze Polycarbonate for Reduced Glare

Bronze polycarbonate provides an attractive tinted appearance while still allowing plenty of natural daylight beneath the roof. The bronze finish helps reduce harsh brightness and glare compared with clear polycarbonate.

This makes it an excellent choice for patios, pergolas, canopies and carports where you want a bright covered area without the full intensity of direct sunlight.

Key Benefits

• 10mm Twin Wall Construction
• 4500mm x 700mm Sheet Size
• Bronze Tinted Finish
• Allows Natural Daylight
• Helps Reduce Solar Glare
• Helps Reduce Harsh Brightness
• Strong & Impact Resistant
• Lightweight & Easy to Handle
• Weather Resistant
• UV Protected for Exterior Use
• Can Be Cut to Required Size
• Compatible Roof Bars & Accessories Available

Ideal for Long Narrow Roofing Sections

The 700mm sheet width makes this size particularly useful for narrow roofing sections, replacement panels and projects where a wider polycarbonate sheet would create unnecessary cutting or waste.

At 4500mm long, it is well suited to larger canopies, pergolas, lean-to roofs and carports where a longer continuous sheet can help reduce unnecessary horizontal joins.

Suitable Applications

• Garden Canopies
• Carports
• Pergolas
• Patio Covers
• Door Canopies
• Bike Shelters
• Shed Roofs
• Lean-To Roofs
• Covered Seating Areas
• Hot Tub Covers
• Covered Walkways
• Replacement Polycarbonate Roofing

Strong & Lightweight Polycarbonate Roofing

Polycarbonate provides excellent impact resistance while remaining considerably lighter and easier to handle than traditional glass. The twin wall construction adds rigidity while creating an insulating air space within the sheet.

For open-sided structures such as canopies, carports and pergolas, 10mm twin wall polycarbonate provides a practical and economical roofing solution where higher levels of thermal insulation are not required.

UV Protected for Exterior Use

The polycarbonate incorporates UV protection to help protect the sheet against degradation caused by prolonged exposure to sunlight.

For the best long-term performance, always install the sheet with the UV-protected face towards the outside of the roof.

Installing 10mm Twin Wall Polycarbonate

The internal channels of the sheet should always run down the direction of the roof slope. This allows condensation within the sheet structure to drain correctly.

The sheet ends should be finished using suitable sealing and breather tapes together with compatible end closures. Appropriate polycarbonate glazing bars should be used between sheets, with sufficient allowance made for thermal expansion and contraction.

Clear, Bronze or Opal Polycarbonate?

Bronze polycarbonate is ideal where natural daylight is wanted together with a tinted appearance and reduced glare.

Clear polycarbonate provides the highest natural light transmission, while Opal polycarbonate produces softer, diffused daylight and provides a more translucent appearance.

Other Polycarbonate Sheet Options

4mm Twin Wall: Clear Only

6mm Twin Wall: Clear Only

10mm Twin Wall: Clear, Bronze and Opal.

16mm Triple Wall: Clear, Bronze and Opal.

25mm Five Wall / Multi-Wall: Clear, Bronze, Opal, Bronze on Opal and Athermic Solar Control.

35mm Five Wall / Multi-Wall: Clear, Bronze, Opal, Bronze on Opal, ST Blue and Heat Guard Opal.

Polycarbonate Roof Bars & Accessories

Timber Supported Roof Bars for 10mm, 16mm & 25mm Polycarbonate

Timber Supported Roof Bars for 25mm & 35mm Polycarbonate

Timber Supported Roof Bars for Hip Roofs

10mm Bronze Polycarbonate Sheets Bristol

Master Plastics supplies 10mm Bronze Twin Wall Polycarbonate Sheets together with compatible glazing bars, end closures, tapes, fixings and other roofing accessories.

Order your 4500mm x 700mm 10mm Bronze Polycarbonate Sheet online or call 0117 971 9922 for help choosing your polycarbonate sheets, roof bars and accessories.