10mm Bronze Twin Wall Polycarbonate Sheet – 2000mm x 980mm

Our 10mm Bronze Twin Wall Polycarbonate Sheet is a strong, lightweight and cost-effective roofing solution for canopies, carports, pergolas, bike shelters, sheds, hot tub roofs and many other outdoor structures.

This sheet measures 2000mm long x 980mm wide x 10mm thick. The bronze tint allows natural daylight through while helping reduce glare and the intensity of direct sunlight compared with clear polycarbonate.

When correctly installed, these sheets are supplied with a 10-year guarantee and provide a practical long-term roofing solution for trade and DIY projects.

Product Specifications

• Product: Twin Wall Polycarbonate Roofing Sheet
• Thickness: 10mm
• Length: 2000mm
• Width: 980mm
• Colour: Bronze
• Structure: Twin Wall
• Material: Polycarbonate
• Application: Roofing & Glazing
• Guarantee: 10 Years When Correctly Installed

Bronze Tint for Reduced Glare

Bronze polycarbonate is an excellent choice where you want natural daylight beneath the roof but would prefer less glare than a clear sheet.

The bronze tint helps soften direct sunlight and can make the area beneath the roof more comfortable, particularly on sunny or south-facing installations.

Key Benefits

• 10mm Twin Wall Construction
• 2000mm x 980mm Sheet Size
• Attractive Bronze Tint
• Allows Natural Daylight Through
• Helps Reduce Glare
• Lightweight & Easy to Handle
• Strong & Impact Resistant
• Weather Resistant
• UV Protected for Exterior Use
• Can Be Cut to Required Size
• Compatible Polycarbonate Roof Bars Available
• Suitable for Trade & DIY Projects
• 10-Year Guarantee When Correctly Installed

Ideal for Canopies, Carports & Pergolas

10mm twin wall bronze polycarbonate is particularly suitable for lightweight outdoor roofing projects where strength, natural light and some reduction in solar brightness are important.

The 2000mm length makes this sheet ideal for smaller to medium-sized canopies, pergolas, garden structures and roof sections.

Suitable Applications

• Door Canopies
• Garden Canopies
• Carports
• Pergolas
• Patio Covers
• Covered Seating Areas
• Bike Shelters
• Sheds
• Lean-To Roofs
• Hot Tub Covers
• Covered Walkways
• DIY Roofing Projects

Lightweight Alternative to Glass

Polycarbonate is considerably lighter and easier to handle than traditional glass, making it particularly useful for timber-supported roofs and DIY installations.

The sheet can be cut to the required size and installed using compatible glazing bars, end closures, sealing tapes and suitable fixings.

Strong & Weather Resistant

Polycarbonate is designed for demanding exterior applications. Its impact-resistant construction provides a strong roofing surface while UV protection helps protect the sheet against degradation caused by prolonged exposure to sunlight.

When correctly installed, these sheets are supplied with a 10-year guarantee.

Installing 10mm Twin Wall Polycarbonate

The internal channels of the polycarbonate sheet should run down the direction of the roof slope so that condensation within the sheet structure can drain correctly.

The sheet ends should be finished using suitable sealing and breather tapes together with compatible end closures. Correct glazing bars should be used between sheets and sufficient allowance should be made for thermal expansion and contraction.

Clear, Bronze or Opal Polycarbonate?

Bronze polycarbonate is a good choice where natural daylight is required but you also want to reduce glare and solar brightness.

Clear polycarbonate is better where maximum daylight is the priority, while Opal provides a softer, diffused light beneath the roof.

Other Polycarbonate Sheets

10mm Twin Wall: Clear, Bronze and Opal.

16mm Triple Wall: Clear, Bronze and Opal.

25mm Five Wall / Multi-Wall: Clear, Bronze, Opal, Bronze on Opal and Athermic Solar Control.

Polycarbonate Roof Bars

Timber Supported Roof Bars for 10mm, 16mm & 25mm Polycarbonate

Timber Supported Roof Bars for 25mm & 35mm Polycarbonate

Timber Supported Roof Bars for Hip Roofs

10mm Bronze Polycarbonate Sheets Bristol

Master Plastics has been supplying polycarbonate roofing products since 1994. We stock 10mm Bronze Twin Wall Polycarbonate Sheets together with compatible glazing bars, end closures, tapes, fixings and roofing accessories.

Order your 2000mm x 980mm 10mm Bronze Polycarbonate Sheet online or call 0117 971 9922 for advice on polycarbonate roofing sheets, glazing bars and accessories.