Ripley GRP Over Door Canopy

The Ripley Over Door Canopy combines traditional styling with the durability and low-maintenance benefits of rigid GRP. Its flat-topped simulated lead-effect roof features a distinctive scalloped edge above a smooth fascia with period detailing, creating an attractive finish for a wide range of door openings.

Manufactured as a strong two-piece GRP unit, the Ripley is designed for fast and straightforward installation. It is supplied with BRG8 brackets in a matching colour to the smooth base, together with a comprehensive fixing kit.

Key Features

• Traditional Styling: Flat-topped design with simulated lead-effect roof and scalloped edge detailing.
• Period Fascia: Smooth fascia incorporating decorative period detailing.
• Strong GRP Construction: Manufactured from rigid Glass Reinforced Plastic.
• Two-Piece Design: Designed to make installation fast and straightforward.
• Matching BRG8 Brackets: Supplied in a colour matching the smooth base.
• Low Maintenance: Requires only occasional washing with warm, soapy water.
• Two Length Options: Available in 1500mm or 1800mm.
• Two Base Colours: Available in White or Brown.
• Comprehensive Fixing Kit: Supplied with the canopy.

Colours & Sizes

• Base Colour: White or Brown
• Length: 1500mm or 1800mm
• Construction: Two-piece rigid GRP unit
• Brackets: BRG8 matching brackets included

Important Information

The Ripley sizes used for ordering are the external sizes.

GRP products are made to order and non-returnable. Please ensure your measurements are accurate and that you have selected the correct product for your requirements before ordering.

Fitting Instructions

1. Find the centre of the door opening and measure the position for the support brackets. The position can vary provided they fit beneath the ends of the base.
2. Fix the brackets level to the wall using the supplied plugs and screws.
3. Position the bottom tray onto the brackets and centralise it with the door opening. Screw it back against the wall and fix the end of each bracket into the tray.
4. Slide the top section onto the bottom tray flange and fix it back to the wall through the lead-look upstand at approximately 300mm intervals.
5. Clean off any dust or dirt and seal using a suitable silicone sealant.
6. The installation is now complete.

The Ripley canopy will provide years of maintenance-free service and requires only occasional washing with warm, soapy water.

Do not use abrasive or solvent cleaners on this product.

Delivery Information

GRP products are delivered using dedicated transport rather than standard carrier networks. This helps reduce the risk of damage during handling and ensures your canopy arrives in good condition.

Dedicated transport requires deliveries to be planned around efficient vehicle loading, so some deliveries may take longer than others. You will be notified of the delivery day before delivery takes place.

Ripley Specification Sheet

Download the Ripley Specification Sheet

Ripley Fitting Guide

Download the Ripley Fitting Guide