The Rockingham Over Door Canopy​ 

Elegant Victorian style door canopy in a smooth finish incorporating fully moulded brackets. 

Manufactured in strong rigid GRP, this overdoor canopy is designed to complement your entrance. Fast easy installation transforms your doorway into an elegant feature with kerb appeal. This canopy is maintenance free, and requires just an occasional wash with warm soapy water to keep its looks.

Available in white, brown, light oak or rosewood, with an optional Lead effect top available. Also available without brackets and with the same choice of colours. Options to fit all tastes.

Important

GRP Products are made to order. Ensure your measurements are correct and that you have chosen the right product for your needs. As they are made to order, GRP products are non-returnable.

Fitting Instructions for Rockingham

Mark out and pre-drill 6mm holes at approx 300mm centres along the  door canopy flanges 
Offer canopy up to the wall and centralise it above the door opening. Mark off the position on the wall for the bracket assembly (if brackets are to be fitted). Make sure you markings are straight and level.
Offer the bracket up to the wall at each side of the door opening. Drill and plug the wall using a 7mm masonry drill bit. Screw the bracket to the wall using 3" screws and plugs supplied.
Lift the canopy onto the brackets and centralise over the door opening. Drill and plug the wall as before, this time using 2"screws and plugs supplied.
Cover all visible screw heads with the appropriate coloured screw caps.
Clean canopy using soap and water or a non-abrasive cleaner.
Seal canopy to the wall using and appropriate colour sealer. (Sealer is not supplied).
Your over door canopy is maintenance-free, however we recommend regular cleaning with soap and water to maintain it's good looks for many years to come.
Care should be taken to check the canopy  for cracking or damage before you sign for it..

Rockingham Spec Sheet - Click Here