Sherbourne GRP Door Canopy

The Sherbourne Door Canopy combines traditional styling with the durability and low-maintenance benefits of strong, rigid GRP. The realistic rolled-lead effect top sits above a smooth fascia and soffit, creating an attractive finish for door openings and bay tops.

The rolled-lead effect roof features one or more simulated ribs depending on the canopy width, reproducing the appearance of a traditional lead installation. The smooth fascia is available in White, Brown, Light Oak or Rosewood.

Key Features

• Traditional Design: Realistic rolled-lead effect top over a smooth fascia and soffit.
• Suitable for Door Openings and Bay Tops: Designed to complement a range of applications.
• Strong GRP Construction: Manufactured from rigid Glass Reinforced Plastic.
• Two-Piece Moulding: Designed to allow fast and straightforward installation.
• Simulated Lead Ribs: One or more ribs are incorporated depending on the canopy width.
• Fascia Colours: White, Brown, Light Oak or Rosewood.
• Square Sides: Supplied as standard.
• BRG5 GRP Brackets: Included with the canopy.
• Fitting Kit: Supplied with the canopy together with fitting instructions.
• 10-Year Guarantee: Backed by a 10-year guarantee against manufacturing defects.

Sizes

• Minimum Width: 2000mm
• Maximum Width: 3000mm
• Size Ordered: Total external size of the canopy

Colours

The smooth fascia and soffit are available in:

• White
• Brown
• Light Oak
• Rosewood

Low-Maintenance GRP Construction

The Sherbourne is manufactured from strong, rigid GRP and requires minimal maintenance. An occasional wash with warm, soapy water is recommended to keep the canopy looking its best.

Important Information

The size ordered is the total external size of the canopy.

GRP products are made to order and non-returnable. Please ensure your measurements are correct and that you have selected the appropriate product for your requirements before ordering.

Standard Fitting Instructions

1. Mark out and pre-drill 6mm holes at approximately 300mm centres along the canopy flanges. Some canopies may have a tray and lid assembly.
2. Offer the canopy up to the wall and centralise it above the door opening. Mark the position of the bracket assembly where brackets are being fitted, ensuring the markings are straight and level.
3. Offer the bracket up to the wall at each side of the door opening. Drill and plug the wall using a 7mm masonry drill bit.
4. Screw the bracket to the wall using the supplied 3-inch screws and plugs.
5. Lift the canopy onto the brackets and centralise it over the door opening.
6. Drill and plug the wall as before, this time using the supplied 2-inch screws and plugs.
7. Cover all visible screw heads with the appropriate coloured screw caps.
8. Clean the canopy using soap and water or a non-abrasive cleaner.
9. Seal the canopy to the wall using an appropriate colour-matched sealer. Sealer is not supplied.

The Sherbourne is maintenance-free and should be cleaned regularly with soap and water to maintain its appearance.

Delivery Information

GRP canopies are delivered using dedicated transport rather than standard carrier networks. This reduces the risk of damage during handling and helps ensure the canopy arrives in good condition.

Dedicated transport means vehicles have to be loaded efficiently, so some deliveries may take longer than others. You will be notified of the delivery day before delivery takes place.

Sherbourne Specification Sheet

Download the Sherbourne Specification Sheet

Sherbourne Fitting Guide

Download the Sherbourne Fitting Guide