Stafford GRP Door Canopy

The Stafford Door Canopy is a contemporary GRP door canopy with a clean, flat-top design and smooth undertray. Designed to provide practical weather protection above entrances, its simple styling suits modern homes, commercial buildings and other properties.

Manufactured from strong Glass Reinforced Plastic (GRP), the Stafford combines durability with a low-maintenance finish. Its straightforward design allows it to be mounted directly to an external wall, making it suitable for a wide range of entrance applications.

Key Features

• Contemporary Flat Top: Clean, simple styling suited to modern architectural designs.
• Smooth Undertray: Provides a neat and finished appearance beneath the canopy.
• GRP Construction: Manufactured from high-quality Glass Reinforced Plastic.
• Weather Resistant: GRP construction provides resistance to weather and UV exposure.
• Direct Wall Mounting: Designed to attach directly to an external wall.
• Colour Options: Available in White or Brown.
• Flexible Widths: Standard overall widths from 1500mm to 2500mm.
• Low Maintenance: Requires only occasional cleaning to maintain its appearance.
• Residential and Commercial Use: Suitable for homes, apartment blocks, offices, retail premises, industrial buildings and public buildings.

Sizes and Colours

• Widths: 1500mm to 2500mm
• Colours: White or Brown
• Material: Glass Reinforced Plastic (GRP)

The size ordered is the total external size of the canopy.

GRP Door Canopy Construction

The Stafford is manufactured from rigid GRP, providing a strong and durable canopy with a clean contemporary appearance. The smooth surfaces are easy to clean and the finish is designed to retain its appearance with minimal maintenance.

Suitable Applications

The Stafford GRP canopy is suitable for a variety of entrances, including:

• House entrances
• Apartment blocks
• Office buildings
• Retail premises
• Industrial buildings
• Public buildings
• Commercial entrances

Important Information

GRP products are made to order and are non-returnable. Please ensure your measurements are accurate and that you have selected the correct product for your requirements before ordering.

The canopy should not be stood on, as this may cause cracking or damage to the surface finish.

Standard Fitting Instructions for Overdoor Canopies

1. Mark out and pre-drill 6mm holes at approximately 300mm centres along the canopy flanges. Some canopies may have a tray and lid assembly.
2. Offer the canopy up to the wall and centralise it above the door opening. Mark the position of the bracket assembly where brackets are being fitted, ensuring the markings are straight and level.
3. Offer the bracket up to the wall on each side of the door opening. Drill and plug the wall using a 7mm masonry drill bit.
4. Screw the bracket to the wall using the supplied 3-inch screws and plugs.
5. Lift the canopy onto the brackets and centralise it over the door opening.
6. Drill and plug the wall as before, this time using the supplied 2-inch screws and plugs.
7. Cover all visible screw heads with the appropriate coloured screw caps.
8. Clean the canopy using soap and water or a non-abrasive cleaner.
9. Seal the canopy to the wall using an appropriate colour sealer. Sealer is not supplied.

The Stafford is maintenance-free and should be cleaned regularly with soap and water to maintain its appearance.

Stafford Specification Sheet

Download the Stafford Specification Sheet

Stafford Fitting Guide

Download the Stafford Fitting Guide