The Suffolk Over Door Canopy​ 

A traditional tile effect hip-roof canopy with light texture fascia and soffit. 
Designed for simple fast installation, and manufactured in strong rigid GRP.The Suffolk overdoor canopy will complement any doorway. Shown mounted on our BRG12 brackets, this canopy is also suitable for mounting above frames for use as a porch. Totally maintenance free, this canopy will simply require a wash down occasionally with warm soapy water to keep its good looks.

Tiles available in terracotta, base colours in white or brown 

960mm projection x 2.2m ext (1930 external frame width) x 600mm total height.

All canopies come with a fitting kit and instructions.

Important

GRP Products are made to order. Ensure your measurements are correct and that you have chosen the right product for your needs. As they are made to order, GRP products are non-returnable.

Fitting Instructions for Suffolk
1. Find centre of door opening and measure out position for the support brackets, this can vary as long as they fit under the base ends.
2. Fix the brackets level onto the wall using plugs, screws, and cover caps provided.
3. Position onto brackets and centralise with the door opening.
4. Drill the upstand at 300mm centres and plug & screw to the wall, using screws & cover caps. Fix end of each bracket into tray.
5. Clean off any dust or dirt and seal using suitable silicone sealant.
6. Your installation is now completed.
Your canopy will give years of maintenance free service and requires only the occasional
wash with warm soapy water.
NB Do not use abrasive or solvent cleaners on this product.

Suffolk Spec Sheet - Click Here

Suffolk Fitting Guide - Click Here