17mm Rosewood uPVC Fascia Board 400mm x 5m

The 17mm x 400mm x 5m Rosewood uPVC Full Replacement Fascia Board is designed for complete roofline replacement projects where a wide fascia board is required. Featuring a rich Rosewood woodgrain finish, it combines the appearance of timber with the durability and low-maintenance benefits of uPVC.

The substantial 17mm thickness allows the board to be fitted directly onto timber joists without the need for backing timber. This reduces the amount of wood required as part of the roofline installation while providing a substantial fixing base for gutter bracket screws.

17mm Full Replacement Fascia – No Backing Timber Required

This is a full replacement fascia board, rather than a thin cover board. It is designed for direct installation onto timber joists without additional backing timber.

The 17mm board is thick enough to hold the screws used for gutter brackets. Boards should be fitted using 65mm nails.

Rosewood Woodgrain Finish

The Rosewood finish provides an attractive natural wood-effect appearance, giving the roofline a traditional and refined finish while retaining the practical benefits of uPVC.

Double-Edged Fascia Board

The board features a double-edged design with no pre-cut edge. Where a straight-cut edge is required, it can be trimmed to a maximum width of 395mm.

Product Specifications

• Product Type: Full replacement uPVC fascia board
• Colour: Rosewood
• Finish: Rosewood woodgrain effect
• Thickness: 17mm
• Width: 400mm
• Length: 5m
• Backing Timber: Not required
• Installation: Directly onto timber joists
• Recommended Fixing: 65mm nails
• Board Design: Double-edged
• Maximum Trimmed Width: 395mm

Less Timber Required

Because the 17mm full replacement fascia does not require backing timber, less wood is required during installation. The substantial board also provides a suitable fixing base for gutter bracket screws.

Suitable for Wide Rooflines

The 17mm Rosewood fascia board is suitable for full fascia replacement and new roofline installations where a wider board is required. The 400mm width provides extensive coverage, while the double-edged design allows flexibility when finishing the board on site.

Dimensions

17mm x 400mm x 5m. Width tolerance: ±5mm.