-74x74.jpg)
-500x500.jpg)
DIY Lean-to Conservatory on Dwarf Walls | 3.5m x 4m
- Brand: Master Plastics
- Product Code: LTCONSERV3.5X4.0W
- Availability: In Stock
DIY Lean-To Conservatory on Dwarf Walls - 3.5m x 4m
Our 3.5m x 4m DIY Lean-To Conservatory is designed for installation onto 600mm dwarf walls, combining the traditional appearance of a dwarf-wall conservatory with modern uPVC frames and energy-efficient glazing.
Manufactured to order by Master Plastics in Bristol using Liniar EnergyPlus uPVC profiles, the conservatory can be customised with your preferred door position, opening direction, opening windows and roof glazing.
Key Features
- Size: 3.5m width x 4.0m projection
- Style: Lean-to conservatory
- Wall type: Designed for 600mm dwarf walls
- Frames: Liniar EnergyPlus uPVC profile system
- Glazing: Low-E, argon-filled toughened glass
- Doors: French doors as standard
- Door upgrades: Sliding patio doors or Modlok bi-fold doors available
- Opening windows: Can be positioned to suit your requirements
- Roof options: 25mm polycarbonate or glass options available
- Made to measure: Layout and dimensions can be configured before manufacture
3.5m x 4m Lean-To Conservatory
This model is based on a 3.5m wide x 4.0m projection lean-to conservatory. The simple roof design makes efficient use of the available space while the glazed uPVC frames allow plenty of natural light into the conservatory.
Because the conservatory is manufactured to order, the frame and door layout can be configured to suit your property rather than being restricted to one standard arrangement.
Designed for 600mm Dwarf Walls
The conservatory is designed to sit on approximately 600mm high dwarf walls. If you require a different dwarf wall height, please contact us before ordering so the frame dimensions can be adjusted accordingly.
Brickwork, foundations and the conservatory base are not included unless specifically stated within the selected product options.
Made-to-Measure Conservatory Design
Door positions, opening windows and frame layouts can be configured before manufacture. This allows you to plan the conservatory around access to your home, garden or patio.
If the standard 3.5m x 4m size is not exactly what you require, alternative made-to-measure dimensions can also be discussed.
Liniar EnergyPlus uPVC Frames
The conservatory frames are manufactured using the Liniar EnergyPlus uPVC profile system and supplied with Low-E, argon-filled toughened glazing.
The uPVC construction provides a durable, low-maintenance finish suitable for a modern DIY conservatory project.
Polycarbonate or Glass Conservatory Roof
The roof can be supplied with 25mm polycarbonate roofing in a choice of:
- Clear
- Bronze
- Opal
Glass roof options are also available where offered, allowing you to select the roof specification that best suits your requirements.
French Doors and Alternative Door Options
French doors are supplied as the standard door option. Their position and opening direction can be selected to suit your chosen layout.
Alternative sliding patio doors or Modlok bi-fold doors can also be selected where available.
Opening Windows and Ventilation
Opening windows can be incorporated into the conservatory and positioned to suit your requirements, helping provide ventilation throughout the finished space.
DIY Conservatory
This product is intended for DIY conservatory installation onto suitable prepared dwarf walls, foundations and against a suitable supporting property wall.
Accurate measurements are essential because the conservatory is manufactured to the agreed specification. Please check the external dimensions and dwarf wall measurements carefully before ordering.
Manufactured to Order in Bristol
Our uPVC conservatory frames are manufactured to order in Bristol. If you require different dimensions, alternative door positions, additional opening windows or another configuration, please contact us before ordering.
Frequently Asked Questions
What size is this lean-to conservatory?
This model is based on a 3.5m width x 4.0m projection.
What height dwarf wall is required?
The standard design is intended for approximately 600mm dwarf walls. Alternative wall heights can be accommodated when confirmed before manufacture.
Are the dwarf walls included?
No. The conservatory is designed to sit on suitable prepared dwarf walls. Brickwork, foundations and the base are not included unless specifically stated.
Can I change the 3.5m x 4m dimensions?
Yes. The conservatory is manufactured to order, so alternative dimensions can be discussed before manufacture.
Can I choose where the doors are positioned?
Yes. The door position and opening direction can be configured to suit your required layout.
Can opening windows be added?
Yes. Opening windows can be incorporated into the design and positioned to provide ventilation where required.
Can I choose a glass roof?
Yes. The conservatory is available with 25mm polycarbonate roofing, with glass roof options also available.
